The Brickwall film - the all-rounder

Dear readers,

Today we are introducing you to a real fighter: The Brick Wall Foil. This film is made for outdoors because it can withstand even the most adverse weather conditions for a long time. Of course, we can print it with a motif of your choice, be it a logo, slogan, lettering or simply a picture. And best of all: installation is child's play and removal is even easier.

Assembly with hot air dryer

Installation is carried out in two steps. First, we stick the material neatly in the desired position and press it firmly onto the surface. Then - and this is particularly important - we carefully heat the Brick Wall film with a hot air gun. At the same time, we press it down with a wallpapering brush or rubber roller. This ensures that the film is properly pressed into the existing structure and achieves the maximum possible adhesive strength. Without this procedure - i.e. just pressing it onto the surface by hand - the service life of the brick wall film would be very short. This also means that other films are much better suited for interior applications (e.g. our Oracal film).

Brick Wall foil - defies wind and weather

Furthermore, the material simply defies all weathers. Whether direct sunlight, frost or rain, no external influence will cause the film any problems. Removal is simply a matter of pulling the film off the façade. Please note: Some of the paint may peel off, so it will have to be painted over. The Brick Wall film is therefore suitable for short, medium and long-term applications. The price is very reasonable at 40 euros/sqm for this durable and reliable material including printing, plus VAT.
If you need the Brick Wall film, please contact us at any time or order online.
Your
Matthias Wenzel