Flag and decorative fabric

Flame retardant material

The flag fabric with a weight of 110g/sqm is ideal for outdoor use. Even when wind and weather pull at the flag, the low weight prevents the fabric from wearing out quickly at the eyelets or hemstitch. This significantly increases the service life. The polyester material is B1-certified and therefore flame-retardant. 

Further processing of flag fabric

This guarantees maximum security. The printed motif shines through on the opposite side, so that your motif advertises in both directions. Of course, you can choose from a wide range of finishing options (eyelets, hemstitching, etc.). The format is freely selectable and starts at small dimensions and quantities of 1. ATTENTION: If you want eyelets/hemstitching, allow for 5 cm more material all round when creating the print file. With a 5 cm hemstitch, you should allow for 10 cm more fabric all round. It is best to place important information or logos 15 cm away from the edge so that nothing of your message is lost.

The decorative fabric with its weight of 220g/sqm is made for both indoor and outdoor use. The waterproof polyester can withstand any weather and the UV-resistant printing ink prevents fading caused by sunlight. Outdoors, the relatively light weight ensures that the eyelets and hemstitching do not wear out so quickly. However, the flag fabric with 110g/sqm is recommended for constant strong weather conditions, as the wind forces have less influence. The 220 decorative fabric is also a good choice for indoor use. It is almost opaque and B1-certified, i.e. flame-retardant. Maximum safety is therefore guaranteed.

Possible applications are trade fairs, the point of sale/checkout area, etc. The format is freely selectable, eyelets and hemstitching are available for further processing. The maximum print width for decorative fabric is 152 cm. ATTENTION: If you want eyelets/hemstitching, allow for 5 cm more material all round when creating the print file. With a 5 cm hemstitch, you should allow for 10 cm more fabric all round. It is best to place important information or logos 15 cm away from the edge so that nothing of your message is lost.

The decorative fabric with a weight of 330g/sqm is the "heaviest" fabric that WENZEL has in its range. The opaque material (the print does NOT show through on the opposite side) is made of 100% polyester and is extremely hard-wearing and tear-resistant. The 330 decorative fabric also withstands all weather conditions, rain, wind etc. are no problem. The UV-resistant printing ink can also withstand permanent exposure to sunlight.
However, the 330g decorative fabric is only recommended to a limited extent for areas with quasi-permanent adverse weather conditions such as strong winds. If the fabric is exposed to permanent wind that pulls at the eyelets or hemstitch, the heavy fabric can be damaged. In such environments, we recommend the "little brothers", i.e. the 110g flag fabric or the 220g decorative fabric.

The format is freely selectable at WENZEL and starts at quantity 1. The maximum print width for the 330 decorative fabric is 152 cm. 

ATTENTION: If you want eyelets/hemstitching, allow for 5 cm more material all round when creating the print file. With a 5 cm hemstitch, you should allow for 10 cm more fabric all round. It is best to place important information or logos 15 cm away from the edge so that nothing of your message is lost. Please feel free to contact us.